GLOBAL MAP DATA DICTIONARY #869.2 -- HL LOWER LEVEL PROTOCOL PARAMETER FILE 6/27/25 PAGE 1
STORED IN ^HLCS(869.2, (175 ENTRIES) SITE: WWW.BMIRWIN.COM UCI: VISTA,VISTA (VERSION 1.6)
-----------------------------------------------------------------------------------------------------------------------------------
This file contains the Lower Layer Protocol Parameters used by the HL7 package. Each protocol will use a separate node to hold the
parameters associated will the LLP used by the Logical Link. The currently defined nodes are:
100 - MailMan 200 - HLLP 300 - X3.28
There may be redundant information contained on nodes, the goal was to allow the applications to grap a one node for all the
parameters required. There should be an entry in this file for each Logical Link defined in file (#870). There is an x-ref "ALLP"
defined for file (#870) to facilitate navigation from this file.
CROSS
REFERENCED BY: NAME(B)
^HLCS(869.2,D0,0)= (#.01) NAME [1F] ^ (#.02) LLP TYPE [2P:869.1] ^
^HLCS(869.2,D0,100)= (#100.01) MAIL GROUP [1P:3.8] ^
^HLCS(869.2,D0,200)= (#200.01) HLLP DEVICE [1P:3.5] ^ (#200.02) RE-TRANSMISION ATTEMPTS [2N] ^ (#200.03) BLOCK SIZE [3N] ^
==>(#200.04) READ TIMEOUT [4N] ^ (#200.05) ACK TIMEOUT [5N] ^ (#200.06) LLP START BLOCK [6S] ^ (#200.07) LLP
==>END BLOCK [7S] ^ (#200.08) PROTOCOL ID VERSION [8S] ^ (#200.09) UNI-DIRECTIONAL WAIT [9N] ^
^HLCS(869.2,D0,300)= (#300.01) X3.28 DEVICE [1P:3.5] ^ (#300.02) MAXIMUM MESSAGE SIZE [2N] ^ (#300.03) MAXIMUM BLOCK SIZE [3N] ^
==>(#300.04) TIMER A [4N] ^ (#300.05) TIMER B [5N] ^ (#300.06) TIMER D [6N] ^ (#300.07) TIMER E [7N] ^
==>(#300.08) TERM [8S] ^ (#300.09) SOH [9S] ^ (#300.1) STX [10S] ^ (#300.11) ETB [11S] ^ (#300.12) ETX [12S] ^
==>(#300.13) EOT [13S] ^ (#300.14) ENQ [14S] ^ (#300.15) RINT [15S] ^ (#300.16) DLE [16S] ^ (#300.17) NAK [17S]
==>^ (#300.18) ACK0 [18S] ^ (#300.19) ACK1 [19S] ^ (#300.2) ACK2 [20S] ^ (#300.21) ACK3 [21S] ^ (#300.22) ACK4
==>[22S] ^ (#300.23) ACK5 [23S] ^ (#300.24) ACK6 [24S] ^ (#300.25) ACK7 [25S] ^
^HLCS(869.2,D0,400)= (#400.01) TCP/IP ADDRESS [1F] ^ (#400.02) TCP/IP PORT [2N] ^ (#400.03) TCP/IP SERVICE TYPE [3S] ^ (#400.04)
==>PERSISTENT [4S] ^ (#400.05) RETENTION [5N] ^ (#400.06) STARTUP NODE [6P:14.7] ^
INPUT TEMPLATE(S):
^DIE(387)= HL TCP/IP ENTER
PRINT TEMPLATE(S):
SORT TEMPLATE(S):
FORM(S)/BLOCK(S):