STANDARD DATA DICTIONARY #71.11 -- NEW RAD PROCEDURE WORKUP FILE 9/29/25 PAGE 1
STORED IN ^RAMRPF(71.11, *** NO DATA STORED YET *** SITE: WWW.BMIRWIN.COM UCI: VISTA,VISTA (VERSION 5.0)
DATA NAME GLOBAL DATA
ELEMENT TITLE LOCATION TYPE
-----------------------------------------------------------------------------------------------------------------------------------
This file temporarily hold a new radiology procedure while it is being developed and associated to the MASTER RADIOLOGY PROCEDURE
file (#71.11). After the procedure is created and matched it will be moved to the RAD/NUC MED PROCEDURE file (#71) and then
deleted from 71.11.
DD ACCESS: @
RD ACCESS: @
WR ACCESS: @
DEL ACCESS: @
LAYGO ACCESS: @
AUDIT ACCESS: @
CROSS
REFERENCED BY: NAME(B)
LAST MODIFIED: SEP 23,2020@10:49:18
71.11,.01 NAME 0;1 FREE TEXT (Required)
INPUT TRANSFORM: K:X[""""!($A(X)=45) X S:$D(X) X=$$UP^XLFSTR(X) K:$L(X)>60!($L(X)<3) X I $D(X) K:'+$$UNI30^RAUTL14(+
$G(DA),X) X
LAST EDITED: NOV 29, 2016
HELP-PROMPT: Answer must be 1-60 characters in length. First 30 must be unique.
DESCRIPTION:
This field contains the name of a new radiology procedure of a detailed type.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
CROSS-REFERENCE: 71.11^B
1)= S ^RAMRPF(71.11,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,"B",$E(X,1,30),DA)
71.11,2 SUPPRESS RADIOPHARM PROMPT 0;2 SET
'0' FOR Ask Radiopharmaceutical;
'1' FOR Suppress Radiopharmaceutical prompt;
LAST EDITED: NOV 29, 2016
HELP-PROMPT: Enter '1' if the radiopharmaceutical prompt(s) should be suppressed.
DESCRIPTION: This question only applies to procedures with an imaging type that use radiopharmaceuticals (i.e.
nuclear medicine or cardiology studies). If the exam status set-up for the affected imaging types
specifies that radiopharmaceutical data should be asked and/or required to progress to various
statuses, this field can be used to over-ride that requirement.
71.11,3 REQUIRED FLASH CARD PRINTER 0;3 POINTER TO DEVICE FILE (#3.5)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Select a device which will print flash cards for this procedure.
DESCRIPTION: This field contains the name (1-20 characters) of the location where the flash cards for this
procedure are to be printed. Normally, the flash cards are printed at the reception desk, however,
for particular procedures the flash cards may be printed at a different location such as where the
exam is to be performed.
71.11,4 REQUIRED FLASH CARD FORMAT 0;4 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the format for this flash card.
DESCRIPTION: This field is used to define the format of the flash card. Normally, the standard default format
for the user's rad/nuc med location is used, however, particular procedures may require a flash
card format that is different than the standard format.
71.11,5 PROMPT FOR MEDS 0;5 SET
'Y' FOR YES;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter 'Y' if case edits and status tracking should prompt for meds.
DESCRIPTION: If this field is set to YES, case edits will prompt for meds administered for this procedure. To
make Status Tracking prompt for meds administered, this field is set to YES, and the Examination
Status parameter 'Ask Medications & Dosages' is set to yes for one or more statuses of the
procedure's imaging type.
71.11,6 TYPE OF PROCEDURE 0;6 SET (Required)
'B' FOR BROAD;
'D' FOR DETAILED;
'S' FOR SERIES;
'P' FOR PARENT;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Select 'B', 'D', 'S' or 'P' for type of procedure.
DESCRIPTION: This field holds the type of procedure. This must be 'D' for Detailed to be included in the MRPF
association process.
71.11,7 STAFF REVIEW REQUIRED 0;7 SET
'Y' FOR YES;
'N' FOR NO;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter a 'YES' if this procedure requires staff physician review.
DESCRIPTION: This field contains a 'Yes' or 'No' value to indicate if this procedure requires an interpreting
staff physician's review of the interpreting resident's report results.
71.11,9 CPT CODE 0;9 POINTER TO CPT FILE (#81)
INPUT TRANSFORM: D CPTCHK^RADD1(+$G(Y)) Q
LAST EDITED: JAN 31, 2019
HELP-PROMPT: Enter the appropriate CPT for this procedure.
DESCRIPTION: This field contains the CPT code (must be a number) for this procedure. All CPT (Current Procedural
Terminology) codes are issued by the AMA. The CPT File is the responsibility of MAS.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
71.11,11 RAD/NM PHYS APPROVAL REQUIRED 0;11 SET
'y' FOR YES;
'n' FOR NO;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter a 'YES' if requesting this procedure need RAD M.D. approval.
DESCRIPTION: This field is set to indicate whether or not requesting this procedure requires a Radiology or
Nuclear Med physician 's approval. If this field contains a 'Yes', the appropriate Imaging Service
must be contacted to request the procedure. If this field is set to 'No', the procedure can be
requested without this approval.
71.11,12 TYPE OF IMAGING 0;12 POINTER TO IMAGING TYPE FILE (#79.2) (Required)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the type of imaging to be used for this procedure.
DESCRIPTION:
This is the type of imaging that will be used for this procedure.
71.11,13 HEALTH SUMMARY WITH REQUEST 0;13 POINTER TO HEALTH SUMMARY TYPE FILE (#142)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the type of Health Summary to include with this procedure.
DESCRIPTION: This field points to the HEALTH SUMMARY TYPE file. When a request is made this field is checked
for an associated Health Summary type and, if one exists, it is printed along with the request.
71.11,17 DISPLAY ED DESC WHEN ORDERED 0;17 SET
'y' FOR YES;
'n' FOR NO;
LAST EDITED: NOV 29, 2016
HELP-PROMPT: Enter 'YES' if the Educational Description is to be displayed when this procedure is ordered.
DESCRIPTION: If the Educational Description of a procedure should be displayed along with the procedure message
(if any) at the time the procedure is ordered, enter 'Yes'. If only the procedure message should
be displayed, enter 'No'.
71.11,18 SINGLE REPORT 0;18 SET
'Y' FOR YES;
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Enter YES if the descendants from this procedure should have their data combined into 1 report.
DESCRIPTION: This field should only be used for parent procedures. If this field is left un-answered, then the
reporting of this procedure's descendants will be put into separate reports, as in Rad/NM v4.5 If
this field is answered 'Y', then the reporting of this procedure's descendants will be combined
into one report, where the case records for these descendants will have the same data for report
text, impression, verifier, pre-verifier, verifier, staff(prim & sec), residents(prim & sec), and
diagnoses, and all other report-related fields.
71.11,19 PROMPT FOR RADIOPHARM RX 0;19 SET
'y' FOR YES;
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Answer 'Yes' if case edits should prompt for Radiopharmaceutical Prescription information for this
procedure.
DESCRIPTION: This field applies only to Detailed or Series procedures with an Imaging Type that uses
radiopharmaceuticals. It controls whether case edit and status tracking options prompt for
prescribing physician, prescribed radiopharmaceutical dose and witness to dose administration. If
you answer 'YES' to this field, prescriber prompts will appear for any radiopharmaceuticals entered
for this procedure. If this field is left blank, prescriber and witness prompts will not appear.
If this field is set to 'YES', Status Tracking will prompt during each edit session until the data
is entered; case edits will always prompt, even if prescriber and witness data has already been
entered.
71.11,20 CONTRAST MEDIA USED 0;20 SET
'Y' FOR YES;
'N' FOR NO;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter 'Yes' if a contrast agent is used with the procedure.
DESCRIPTION: This field contains a value to indicate if a contrast agent is used with this Rad/Nuc Med
procedure. Acceptable values are: 'Y' for 'Yes' and 'N' for 'No'.
71.11,50 DEFAULT RADIOPHARMACEUTICALS 71.1108;0 POINTER Multiple #71.1108 (Add New Entry without Asking)
DESCRIPTION: Default radiopharmaceuticals and related information are edited by ADPACs during system set-up. If
default radiopharmaceutical(s) are entered for a procedure, they will be automatically entered on
the patient record each time this procedure is registered. Information entered by the ADPAC related
to the radiopharmaceutical may appear during case edit as a default response or may be used for
edit checking.
71.1108,.01 DEFAULT RADIOPHARMACEUTICALS 0;1 POINTER TO DRUG FILE (#50) (Multiply asked)
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Enter default radiopharmaceutical associated with this nuclear medicine procedure.
DESCRIPTION: Default radiopharmaceuticals and related information are edited by ADPACs during system set-up.
If default radiopharmaceutical(s) are entered for a procedure, they will be automatically entered
on the patient record Default radiopharmaceuticals and related Information entered by the ADPAC
related to the radiopharmaceutical may appear during case edit as a default response or may be
used for edit checking. No default radiopharmaceuticals may be used on 'parent' or 'broad' type
procedures.
CROSS-REFERENCE: 71.1108^B
1)= S ^RAMRPF(71.11,DA(1),71.1108,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),71.1108,"B",$E(X,1,30),DA)
71.1108,2 USUAL DOSE 0;2 NUMBER
INPUT TRANSFORM: K:+X'=X!(X>99999.9999)!(X<.0001)!(X?.E1"."5N.N) X
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Type a number between .0001 and 99999.9999, 4 decimal digits.
DESCRIPTION: This is the usual dosage (in mCi) associated with this radiopharmaceutical. It will appear as an
informational item on the screen just before the user is prompted for the actual Dose. If
nothing is entered in this field, no usual dose information will be displayed.
71.1108,3 DFLT ROUTE OF ADMINISTRATION 0;3 POINTER TO ROUTE OF ADMINISTRATION FILE (#71.6)
LAST EDITED: NOV 29, 2016
HELP-PROMPT: Enter the default route of administration when this radiopharmaceutical is administered for this
procedure.
DESCRIPTION: This is the route of administration commonly associated with this radiopharmaceutical for this
procedure. It will appear as the default response when the route of administration is asked
during case editing. If nothing is entered in this field, no default route of administration
will be displayed.
71.1108,4 DEFAULT SITE OF ADMINISTRATION 0;4 POINTER TO SITE OF ADMINISTRATION FILE (#71.7)
INPUT TRANSFORM:S DIC("S")="N RA7108 S RA7108=$G(^RAMIS(71,DA(1),""NUC"",DA,0)) I $S(+$P(RA7108,""^"",3):$D(^RAMIS(
71.6,+$P(RA7108,""^"",3),""SITE"",""B"",+Y)),1:1)" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Enter the default site of administration when this radiopharmaceutical is entered for this
procedure.
DESCRIPTION: The default bodily site for administering this radiopharmaceutical for this procedure should be
entered here. The system will use this as a default response during case editing. If nothing is
entered here, there will be no default response to the Site of Administration question during case
editing.
SCREEN: S DIC("S")="N RA7108 S RA7108=$G(^RAMIS(71,DA(1),""NUC"",DA,0)) I $S(+$P(RA7108,""^"",3):$D(^RAMIS(
71.6,+$P(RA7108,""^"",3),""SITE"",""B"",+Y)),1:1)"
EXPLANATION: for nuclear med only, must be valid site defined for this route.
71.1108,5 HIGH ADULT DOSE 0;5 NUMBER
INPUT TRANSFORM:K:+X'=X!(X>99999.9999)!(X<.0001)!(X?.E1"."5N.N) X
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Type a number between .0001 and 99999.9999, 4 decimal digits.
DESCRIPTION: This is the highest usual adult dosage commonly associated with this radiopharmaceutical when
administered for this procedure. The system will display this value and the low adult dose when
asking for the actual dosage during case editing. If the dosage entered for an exam falls outside
of the usual high/low range, the person editing the case will see a warning message. This is a
mandatory data item.
71.1108,6 LOW ADULT DOSE 0;6 NUMBER
INPUT TRANSFORM:K:+X'=X!(X>99999.9999)!(X<.0001)!(X?.E1"."5N.N) X
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Type a number between .0001 and 99999.9999, 4 decimal digits.
DESCRIPTION: This is the lowest usual adult dosage commonly associated with this radiopharmaceutical when
administered for this procedure. The system will display this value and the high adult dose when
asking for the actual dosage during case editing. If the dosage entered for an exam falls outside
of the usual high/low range, the person editing the case will see a warning message. If you do not
want a warning to appear no matter how low the dosage entered, do not enter a low range dosage
here.
71.1108,7 DEFAULT FORM 0;7 SET
'L' FOR Liquid;
'G' FOR Gas;
'A' FOR Aerosol;
'P' FOR Solid (Pill);
'S' FOR Solid (Other);
LAST EDITED: OCT 19, 2016
HELP-PROMPT: Enter the default form of the Radiopharmaceutical.
DESCRIPTION: This is the form of this Radiopharmaceutical when used in this procedure. If entered, it will be
used as the default answer to the 'Form' prompt during case edits. Choices are as follows:
Liquid (e.g. all injections)
Gas (e.g. xenon, krypton)
Aerosol (e.g. DTPA aerosol)
Solid (Pill) (e.g. I-123 or I-131 pill,
schilling test)
Solid (Other) (e.g. radioactive egg for
gastric emptying time) 2
71.11,55 DEFAULT MEDICATIONS P;0 POINTER Multiple #71.1155
DESCRIPTION: Default medication(s) may be entered by the ADPAC for a procedure. If they are entered, the system
will automatically enter them on the patient's exam record whenever the procedure is registered.
NOTE: Default Radiopharmaceuticals may NOT be entered here; they should be entered on a separate
field.
71.1155,.01 DEFAULT MEDICATION 0;1 POINTER TO DRUG FILE (#50) (Multiply asked)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter a medication routinely used with this procedure.
DESCRIPTION: Default medication(s) may be entered by the ADPAC for a procedure. If they are entered, the
system will automatically enter them on the patient's exam record whenever the procedure is
registered. NOTE: Default Radiopharmaceuticals may NOT be entered here; they should be entered
on a separate field.
CROSS-REFERENCE: 71.1155^B
1)= S ^RAMRPF(71.11,DA(1),"P","B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),"P","B",$E(X,1,30),DA)
71.1155,2 DEFAULT MED DOSE 0;2 FREE TEXT
INPUT TRANSFORM: K:$L(X)>40!($L(X)<3) X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Answer must be 3-40 characters in length.
DESCRIPTION: This is the default dose of this medication when administered for this procedure. If a default
dose is entered for this medication it will be automatically entered on the patient's exam record
at the time this procedure is registered. Acceptable formats are: 99999.999 unit_of_measure -OR-
99999 unit_of_measure. Unit_Of_Measure may be between 1-30 characters in length. Example: 2.5 m
71.11,75 FILMS NEEDED F;0 POINTER Multiple #71.1102
DESCRIPTION:
This is a multiple field containing information about the films usually needed for this procedure.
71.1102,.01 FILM TYPE 0;1 POINTER TO FILM SIZES FILE (#78.4) (Multiply asked)
INPUT TRANSFORM:S DIC("S")="I $S('$D(^(""I"")):1,'^(""I""):1,DT'>^(""I""):1,1:0),('$D(^RA(78.4,""AW"",1,+Y)))" D ^D
IC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: For those frequently performed procedures, enter a film type.
DESCRIPTION: This field contains a default value of the type of film (from the Film Sizes File) usually needed
for this procedure.
SCREEN: S DIC("S")="I $S('$D(^(""I"")):1,'^(""I""):1,DT'>^(""I""):1,1:0),('$D(^RA(78.4,""AW"",1,+Y)))"
EXPLANATION: Only active non wasted film types are selectable.
CROSS-REFERENCE:71.1102^B
1)= S ^RAMRPF(71.11,DA(1),"F","B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),"F","B",$E(X,1,30),DA)
71.11,100 INACTIVATION DATE I;1 DATE
INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1!($$FR^XLFDT(X)) X
LAST EDITED: MAY 14, 2020
HELP-PROMPT: Enter a date between Jan 2nd, 1841 and Oct 15th, 2114.
DESCRIPTION: This field contains the date this procedure was inactivated by the rad/nuc med coordinator. Until
the day following the inactivation date, the procedure appears on the active procedure list and may
be selected. If this procedure is active in the Common Procedure file, it must be removed from the
active common procedure list before an inactivation date can be entered.
TECHNICAL DESCR: With the release of RA*5.0*169 the date range between Jan 2nd, 1841 and Oct 15th, 2114 is now
enforced.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
71.11,125 CONTRAST MEDIA CM;0 SET Multiple #71.11125
DESCRIPTION:
This field identifies the contrast agent(s) associated with this Rad/Nuc Med procedure.
71.11125,.01 CONTRAST MEDIA 0;1 SET (Multiply asked)
'I' FOR Ionic Iodinated;
'N' FOR Non-ionic Iodinated;
'L' FOR Gadolinium;
'C' FOR Cholecystographic;
'G' FOR Gastrografin;
'B' FOR Barium;
'M' FOR unspecified contrast media;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the contrast agent(s) associated with this procedure.
DESCRIPTION:
This field identifies the contrast agent(s) associated with this Rad/Nuc Med procedure.
CROSS-REFERENCE: 71.11125^B
1)= S ^RAMRPF(71.11,DA(1),"CM","B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),"CM","B",$E(X,1,30),DA)
71.11,135 DEFAULT CPT MODIFIERS(PROC) DCM;0 POINTER Multiple #71.11135
DESCRIPTION: One or more default CPT Modifiers may be entered for this procedure. Each entry will be screened
against the CPT CODE for this procedure.
71.11135,.01 DEFAULT CPT MODIFIERS(PROC) 0;1 POINTER TO CPT MODIFIER FILE (#81.3) (Multiply asked)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter one or more default CPT Modifiers for this CPT code.
DESCRIPTION: One or more default CPT Modifiers may be entered for this procedure. Each entry will be screened
against the CPT CODE for this procedure.
CROSS-REFERENCE: 71.11135^B
1)= S ^RAMRPF(71.11,DA(1),"DCM","B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),"DCM","B",$E(X,1,30),DA)
71.11,150 SYNONYM 1;0 Multiple #71.111
DESCRIPTION: This is a multiple field which allows procedure names to be cross-referenced by other names. They
may be locally preferred names, or a common misspelling.
71.111,.01 SYNONYM 0;1 FREE TEXT (Multiply asked)
INPUT TRANSFORM: K:$L(X)>15!($L(X)<2) X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Answer must be 2-15 characters in length.
DESCRIPTION: This is another name for the Procedure. It may be the locally preferred name, or a common
misspelling.
CROSS-REFERENCE: 71.111^B
1)= S ^RAMRPF(71.11,DA(1),1,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),1,"B",$E(X,1,30),DA)
71.11,175 AMIS CODES 2;0 POINTER Multiple #71.1103
DESCRIPTION:
This is a multiple field containing information for the AMIS codes associated with this procedure.
71.1103,.01 AMIS CODE 0;1 POINTER TO MAJOR RAD/NUC MED AMIS CODES FILE (#71.1) (Multiply asked)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter a valid AMIS code for this procedure.
DESCRIPTION: This field contains the valid AMIS code(s) (from the Major AMIS Codes File) associated with this
exam procedure.
CROSS-REFERENCE: 71.1103^B
1)= S ^RAMRPF(71.11,DA(1),2,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),2,"B",$E(X,1,30),DA)
71.1103,2 AMIS WEIGHT MULTIPLIER 0;2 NUMBER
INPUT TRANSFORM: K:+X'=X!(X>99)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Type a number between 1 and 99, 0 decimal digits.
DESCRIPTION: This field contains a number (0-99) to indicate to the various workload report routines how many
times to multiply the weighted work units associated with the AMIS code. The weight for each
AMIS code is stored in the 'MAJOR RAD/NUC MED AMIS CODE' file.
Most multipliers will be 1. However, there are some that are greater than 1. For example, the
procedure called 'UPPER GI + SMALL BOWEL' has the AMIS code 9-GASTROINTESTINAL which has a weight
of 6 work units. But, the AMIS multiplier is 2. Therefore on the workload reports, the site will
get credit for 12 weighted work units each time it is performed.
Radiology Central Office has directed that the weighted work unit for Ultrasound procedures
involving multiple organs in the same visit can be counted only once if the organs are located
close to each other. (i.e. Liver and Gallbladder)
71.1103,3 BILATERAL? 0;3 SET
'Y' FOR YES;
'N' FOR NO;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter a 'YES' if this procedure is considered bilateral.
DESCRIPTION: This field will contain a 'Yes' to indicate that this is a bilateral procedure or a 'No' if it is
not a bilateral procedure. If it contains a 'Yes', then the system multiplies the AMIS weight by
2.
71.11,200 MESSAGE 3;0 POINTER Multiple #71.12
DESCRIPTION:
This is a multiple, used to select messages that pertain to this procedure.
71.12,.01 MESSAGE 0;1 POINTER TO RAD/NUC MED PROCEDURE MESSAGE FILE (#71.4) (Multiply asked)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Select one or more messages that should be displayed for this procedure.
DESCRIPTION: This field contains any message from the RAD/NUC PROCEDURE MESSAGE file that relate to this
procedure.
CROSS-REFERENCE: 71.12^B
1)= S ^RAMRPF(71.11,DA(1),3,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),3,"B",$E(X,1,30),DA)
71.11,300 DESCENDENTS 71.1105;0 POINTER Multiple #71.1105
DESCRIPTION: This is a multiple field containing procedures that are considered descendents of this parent
procedure. Only 'Parent' procedures may have descendents. If a 'Parent' procedure is ordered, its
descendents will be registered during the registration function.
71.1105,.01 DESCENDENTS 0;1 POINTER TO RAD/NUC MED PROCEDURES FILE (#71) (Multiply asked)
INPUT TRANSFORM: S DIC("S")="I $$DESC^RANPRO1(D0,+Y)" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: MAR 31, 2017
HELP-PROMPT: Enter a procedure name which is related to the parent procedure.
DESCRIPTION: This is a multiple field containing procedures that are considered descendents of this parent
procedure. Only 'Parent' procedures may have descendents. If a 'Parent' procedure is ordered,
its descendents will be registered during the registration function.
SCREEN: S DIC("S")="I $$DESC^RANPRO1(D0,+Y)"
EXPLANATION: Select only active detailed or series procedures of the same imaging type as the parent.
CROSS-REFERENCE: 71.1105^B
1)= S ^RAMRPF(71.11,DA(1),71.1105,"B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),71.1105,"B",$E(X,1,30),DA)
71.11,500 EDUCATIONAL DESCRIPTION EDU;0 WORD-PROCESSING #71.13 (IGNORE "|")
DESCRIPTION: The text entered here should describe the procedure. It may be used by clinicians who are trying
to familiarize themselves with imaging procedures that are available via an option within this
software system. This text can also be displayed along with the procedure message during the
ordering process if the Rad/Nuc Med Procedure file parameter that controls displaying it when
ordered is set to 'Yes'.
LAST EDITED: OCT 18, 2016
HELP-PROMPT: The text entered here should describe the procedure.
DESCRIPTION: The text entered here should describe the procedure. It may be used by clinicians who are trying
to familiarize themselves with imaging procedures that are available via an option within this
software system. This text can also be displayed along with the procedure message during the
ordering process if the Rad/Nuc Med Procedure file parameter that controls displaying it when
ordered is set to 'Yes'.
71.11,731 MODALITY MDL;0 POINTER Multiple #71.11731
DESCRIPTION: This multiple field points to the RAD MODALITY DEFINED TERMS file (#73.1). Which is a list of
procedure modes.
71.11731,.01 MODALITY 0;1 POINTER TO RAD MODALITY DEFINED TERMS FILE (#73.1) (Multiply asked)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Choose a modality from the pre-defined list.
DESCRIPTION: This field points to the RAD MODALITY DEFINED TERMS file (#73.1). Which is a list of procedure
modes.
CROSS-REFERENCE: 71.11731^B
1)= S ^RAMRPF(71.11,DA(1),"MDL","B",$E(X,1,30),DA)=""
2)= K ^RAMRPF(71.11,DA(1),"MDL","B",$E(X,1,30),DA)
71.11,900 MRPF NAME NTRT;1 POINTER TO MASTER RADIOLOGY PROCEDURE FILE (#71.99)
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the Master Radiology Procedure Gold Name that matches this entry.
DESCRIPTION: This field is a pointer to the MASTER RADIOLOGY PROCEDURE file (#71.99). This is the link to the
national standard names for radiology procedures.
71.11,901 Exception Flag NTRT;2 SET
'Y' FOR YES;
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter Yes if NTRT request is approved by the procedure.
DESCRIPTION: When a new procedure is entered or if there is no match to this procedure in the MASTER RADIOLOGY
PROCEDURE file (#71.99) this field will be set to 'YES' to indicate that this procedure has been
submitted to the New Terminology Rapid Turnaround (NTRT) team for action. When a new procedure is
created for the MRPF that is a match to this procedure this field will be set to null.
71.11,902 ENTRY CREATION DATE NTRT;3 DATE
INPUT TRANSFORM: S %DT="EX" D ^%DT S X=Y K:Y<1 X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Enter the date that this procedure was entered.
DESCRIPTION:
This is the date that this procedure was created in this file.
71.11,903 LOINC NTRT;4 FREE TEXT
INPUT TRANSFORM: K:$L(X)>20!($L(X)<3) X
LAST EDITED: OCT 18, 2016
HELP-PROMPT: Answer must be 3-20 characters in length.
DESCRIPTION: This field holds the LOINC from the mapped Procedure in the MASTER RADIOLOGY PROCEDURE file
(#71.99).
FILES POINTED TO FIELDS
CPT (#81) CPT CODE (#9)
CPT MODIFIER (#81.3) DEFAULT CPT MODIFIERS(PROC):DEFAULT CPT MODIFIERS(PROC) (#.01)
DEVICE (#3.5) REQUIRED FLASH CARD PRINTER (#3)
DRUG (#50) DEFAULT RADIOPHARMACEUTICALS:DEFAULT RADIOPHARMACEUTICALS (#.01)
DEFAULT MEDICATIONS:DEFAULT MEDICATION (#.01)
FILM SIZES (#78.4) FILMS NEEDED:FILM TYPE (#.01)
HEALTH SUMMARY TYPE (#142) HEALTH SUMMARY WITH REQUEST (#13)
IMAGING TYPE (#79.2) TYPE OF IMAGING (#12)
LBL/HDR/FTR FORMATS (#78.2) REQUIRED FLASH CARD FORMAT (#4)
MAJOR RAD/NUC MED AMIS CODES
(#71.1) AMIS CODES:AMIS CODE (#.01)
MASTER RADIOLOGY PROCEDURE
(#71.99) MRPF NAME (#900)
RAD MODALITY DEFINED TERMS
(#73.1) MODALITY:MODALITY (#.01)
RAD/NUC MED PROCEDURE MESSAGE
(#71.4) MESSAGE:MESSAGE (#.01)
RAD/NUC MED PROCEDURES (#71) DESCENDENTS:DESCENDENTS (#.01)
ROUTE OF ADMINISTRATION (#71.6) DEFAULT RADIOPHARMACEUTICALS:DFLT ROUTE OF ADMINISTRATION (#3)
SITE OF ADMINISTRATION (#71.7) DEFAULT RADIOPHARMACEUTICALS:DEFAULT SITE OF ADMINISTRATION (#4)
INPUT TEMPLATE(S):
NEW RAD PROCEDURE APR 05, 2017@11:13 USER #0
PRINT TEMPLATE(S):
SORT TEMPLATE(S):
FORM(S)/BLOCK(S):