STANDARD DATA DICTIONARY #78.6 -- CAMERA/EQUIP/RM FILE 9/29/25 PAGE 1
STORED IN ^RA(78.6, *** NO DATA STORED YET *** SITE: WWW.BMIRWIN.COM UCI: VISTA,VISTA (VERSION 5.0)
DATA NAME GLOBAL DATA
ELEMENT TITLE LOCATION TYPE
-----------------------------------------------------------------------------------------------------------------------------------
This file contains all the camera/equip/rm that may be used to perform imaging examinations. The 'RADIOLOGY LOCATIONS' file uses
this file to indicate which camera/eqip/rm are allowable choices when the technologist attaches a camera/equip/rm to an exam s/he
has performed. In other words, when the procedure is performed on a patient at a location, the only valid choices are those
cameras/equip/rms associated with that location.
A camera/equip/rm can be associated with more than one location.
Entries in this file should not be deleted. Adding new entries is always allowed.
Data Storage
------------
The data for the 'CAMERA/EQUIP/RM' file is stored in the ^RA(78.6, global. At the present time this file is very static after
day-one initialization is complete. However, it still should be journaled. It should also be translated if the operating system
supports this function.
Input Templates
---------------
The rad/nuc med package does not use any input templates associated with this file.
Print Templates
---------------
The rad/nuc med package does not use any print templates associated with this file.
Sort Templates
--------------
The rad/nuc med package does not use any sort templates associated with this file.
APPLICATION GROUP(S): RA
IDENTIFIED BY: DESCRIPTION (#2)
POINTED TO BY: PRIMARY CAMERA/EQUIP/RM field (#18) of the EXAMINATIONS sub-field (#70.03) of the REGISTERED EXAMS sub-field
(#70.02) of the RAD/NUC MED PATIENT File (#70)
DEFAULT CAMERA/EQUIP/RM field (#14) of the RAD/NUC MED PROCEDURES File (#71)
CAMERA/EQUIP/RM field (#.01) of the CAMERAS/EQUIP/RMS sub-field (#79.12) of the IMAGING LOCATIONS File (#79.1)
RAD PRIMARY CAMERA/EQUIP/RM field (#303) of the IMAGING SITE PARAMETERS File (#2006.1)
IMPORTER RAD CAMERA field (#122) of the DICOM GATEWAY PARAMETER File (#2006.563)
READY FOR INTERP TRIGGER VALUE field (#108) of the MAG VISTARAD SITE PARAMETERS File (#2006.69)
CROSS
REFERENCED BY: CAMERA/EQUIP/RM(B), DESCRIPTION(C)
78.6,.01 CAMERA/EQUIP/RM 0;1 FREE TEXT (Required)
CAMERA/EQUIPMENT/ROOM
INPUT TRANSFORM: K:$L(X)>30!($L(X)<1)!'(X'?1P.E)!(X'?.ANP) X
LAST EDITED: JUN 03, 1994
HELP-PROMPT: Enter a name for this camera/equip/rm, between 1 and 30 characters in length.
DESCRIPTION: This field contains the name of this camera/equipment/room. Names must be between 1 and 30
characters in length.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
CROSS-REFERENCE: 78.6^B
1)= S ^RA(78.6,"B",$E(X,1,30),DA)=""
2)= K ^RA(78.6,"B",$E(X,1,30),DA)
Regular 'B' cross reference assigned by FileMan.
78.6,2 DESCRIPTION 0;2 FREE TEXT
DESCRIPTION OF THIS CAMERA/EQUIPMENT/ROOM
INPUT TRANSFORM: K:X[""""!($A(X)=45) X I $D(X) K:$L(X)>40!($L(X)<3) X
LAST EDITED: JUN 03, 1994
HELP-PROMPT: Enter a brief description, between 3 and 40 characters in length, to define the types of procedures
performed.
DESCRIPTION: This field is used to describe this camera/equipment/room and define what types of procedures may
be performed there. 'Triple Head Spec Scanner' is an example of a description. Descriptions may
be between 3 and 40 characters in length.
SOURCE OF DATA: COORDINATOR
CROSS-REFERENCE: 78.6^C
1)= S ^RA(78.6,"C",$E(X,1,30),DA)=""
2)= K ^RA(78.6,"C",$E(X,1,30),DA)
Allows look-up of camera/equip/rm by description.
INPUT TEMPLATE(S):
PRINT TEMPLATE(S):
SORT TEMPLATE(S):
FORM(S)/BLOCK(S):