STANDARD DATA DICTIONARY #79.1 -- IMAGING LOCATIONS FILE 9/29/25 PAGE 1
STORED IN ^RA(79.1, *** NO DATA STORED YET *** SITE: WWW.BMIRWIN.COM UCI: VISTA,VISTA (VERSION 5.0)
DATA NAME GLOBAL DATA
ELEMENT TITLE LOCATION TYPE
-----------------------------------------------------------------------------------------------------------------------------------
This file contains, for each imagaing location entry, parameters that the module uses during various stages of exam and report
processing and inquiring. The parameter switches allow the 'customizing' of the module for each location by the package
coordinator.
Within an imaging division there may be a number of physical locations where a imaging procedure can be performed. The module is
designed to handle multiple locations within a division. However, each location can only be associated with one division.
These parameters are loaded into the user's partition once the module determines which division and location the user is currently
associated with. This is determined by one of two ways: 1) the device the user is using is an entry in the 'INPUT DEVICES'
sub-file for a location or 2) if (1) is not true than the module will simply ask the user what his/her current location is.
Entries in this file should not be deleted. Adding new entries is always allowed.
Data Storage
------------
The data for the 'IMAGING LOCATIONS' file is stored in the ^RA(79.1, global. At the present time this file is very static after
day-one initialization is complete. However, it still should be journaled. It should also be translated if the operating system
supports this function.
Input Templates
---------------
The following is a list of input templates used by the package and the entry in the OPTIONS file (#19) that uses the template:
Compiled
Name Routine Description; Option(s)
---- ------- -----------------------
RA LOCATION PARAMETERS Used to enter/edit location parameters
that are controlled by the package
coordinator;
RA SYSLOC
RA SITE MANAGER Used to enter/edit location parameters
that are controlled by IRM;
RA DEVICE
If any modifications to these input templates are needed for local purposes, then great care should be taken not to degrade any
branching logic in the template.
Print Templates
---------------
The following is a list of print templates used by the package:
Name Description; Option(s)
---- ----------------------
RA IMAGE LOC LIST Print the location parameters for the entries in
this file;
RA SYSLOCLIST
RA EXAM ROOM LIST Prints a list of cameras/equip/rms
and the locations
associated with the camera/equip/rm;
RA SYSEXLIST
Sort Templates
--------------
The following is a list of sort templates used by the package:
Name Related Print Template
---- ----------------------
RA IMAGE LOC LIST RA IMAGE LOC LIST
RA EXAM ROOM LIST RA EXAM ROOM LIST
The modification of any sort templates is not recommended.
APPLICATION GROUP(S): RA
IDENTIFIED BY: TYPE OF IMAGING (#6)[R]
POINTED TO BY: IMAGING LOCATION field (#4) of the REGISTERED EXAMS sub-field (#70.02) of the RAD/NUC MED PATIENT File (#70)
IMAGING LOCATION field (#8) of the RAD/NUC MED COMMON PROCEDURE File (#71.3)
INTERPRETING IMAGING LOCATION field (#86) of the RAD/NUC MED REPORTS File (#74)
IMAGING LOCATION field (#20) of the RAD/NUC MED ORDERS File (#75.1)
IMAGING LOCATION field (#.01) of the IMAGING LOCATIONS sub-field (#79.01) of the RAD/NUC MED DIVISION File (#79)
RAD/NUC MED LOCATION ACCESS field (#.01) of the RAD/NUC MED LOCATION ACCESS sub-field (#200.074) of the NEW PERSON
File (#200)
IMAGING LOCATION field (#11) of the RADIOLOGY EXTRACT File (#727.814)
IMAGING LOCATION field (#.01) of the OUTSIDE IMAGING LOCATION File (#2006.5759)
CROSS
REFERENCED BY: LOCATION(B), TYPE OF IMAGING(BIMG)
INDEXED BY: CREDIT METHOD (ACM)
LAST MODIFIED: JUN 27,2025@16:15:13
79.1,.01 LOCATION 0;1 POINTER TO HOSPITAL LOCATION FILE (#44) (Required)
IMAGING LOCATION
INPUT TRANSFORM: S DIC("S")="I $P(^(0),U,3)=""C"",'$D(^(""I"")),($D(^RAMIS(71.5,""B"",+$P(^(0),U,7))))" D ^DIC K DIC
S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: AUG 05, 2003
HELP-PROMPT: Select the appropriate location.
DESCRIPTION: This field points to the Hospital Location File, and contains the name of this location. The
Hospital Location pointed to should be a COUNT clinic, with a type of 'CLINIC', and should be a
clinic that prohibits making appointments or creating appointment patterns. The Stop Code of the
clinic in file #44 should be a valid imaging stop code (i.e. an entry in file #71.5) and should
match the DSS ID field #22 of the Imaging Location in file #79.1. The Institution of this clinic
in file #44 should match the Rad/Nuc Med Division to which this Imaging Location is assigned.
Coordination with MAS personnel is necessary to add locations to the Hospital Location file.
TECHNICAL DESCR:
Cannot edit this field through FileMan, part of patch RA*5*42.
SCREEN: S DIC("S")="I $P(^(0),U,3)=""C"",'$D(^(""I"")),($D(^RAMIS(71.5,""B"",+$P(^(0),U,7))))"
EXPLANATION: Entry must be an active "Clinic" type with a valid imaging Stop Code in the Hospital Location file.
DELETE TEST: 1,0)= I 1 W !?5,$C(7),"Imaging Locations CANNOT be deleted!"
SOURCE OF DATA: RAD/NUC MED COORDINATOR
UNEDITABLE
CROSS-REFERENCE: 79.1^B
1)= S ^RA(79.1,"B",$E(X,1,30),DA)=""
2)= K ^RA(79.1,"B",$E(X,1,30),DA)
3)= DO NOT DELETE
Regular 'B' cross reference assigned by FileMan.
79.1,.1 SUPPRESS ORDERING? .1;1 SET
'Y' FOR YES;
OUTPUT TRANSFORM: S Y=$S(Y="Y":"Yes",1:"No")
LAST EDITED: JAN 21, 2021
HELP-PROMPT: Enter YES to suppress orders from being submitted to this location.
DESCRIPTION: This imaging location parameter can be set to 'Yes' to indicate that location will not be available
to submit an imaging request to in CPRS. It is recommended that this be set for 'No Credit'
locations only.
79.1,2 HOW MANY FLASH CARDS PER VISIT 0;2 NUMBER
HOW MANY FLASH CARDS TO PRINT PER VISIT?
INPUT TRANSFORM: K:+X'=X!(X>10)!(X<0)!(X?.E1"."1N.N) X
HELP-PROMPT: Enter a number, between 0 and 10, for the number of flash cards to print per patient visit.
DESCRIPTION: This imaging 'locations' parameter is used to set up the number of flash cards to print per patient
visit. It must contain a whole number between 0 and 10. If the Division parameter 'Print Flash
Card for each exam' is set to 'Yes', this location parameter is ignored.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,3 FLASH CARD PRINTER NAME 0;3 POINTER TO DEVICE FILE (#3.5)
NAME OF THE DEVICE TO PRINT FLASH CARDS ON
LAST EDITED: FEB 07, 1996
HELP-PROMPT: Select the device where the flash cards and exam labels are to be printed.
DESCRIPTION: This 'locations' parameter can contain the device name (1-20 characters) that flash cards and exam
labels are to be printed on. If this field is filled in, the system automatically queues the
process and the user is not asked the device question.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,4 HOW MANY JACKET LBLS PER VISIT 0;4 NUMBER
HOW MANY JACKET LABELS TO PRINT PER VISIT?
INPUT TRANSFORM: K:+X'=X!(X>10)!(X<0)!(X?.E1"."1N.N) X
HELP-PROMPT: Enter a number, between 0 and 10, for the number of jacket labels to print per patient visit.
DESCRIPTION: This 'locations' parameter is used to set up the number of jacket labels to print per patient
visit. It must contain a whole number between 0 and 10.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,5 JACKET LABEL PRINTER NAME 0;5 POINTER TO DEVICE FILE (#3.5)
NAME OF THE DEVICE TO PRINT JACKET LABELS ON
LAST EDITED: FEB 07, 1996
HELP-PROMPT: Select the device where the jacket labels are to be printed.
DESCRIPTION: This 'locations' parameter can contain the device name (1-20 characters) that the jacket labels are
to be printed on. If this field is filled in, the system automatically queues the process and the
user is not asked the device question.
SOURCE OF DATA: SITE MANAGER
79.1,6 TYPE OF IMAGING 0;6 POINTER TO IMAGING TYPE FILE (#79.2) (Required)
THE TYPE OF IMAGING USED FOR THE EXAM
INPUT TRANSFORM: D:'$D(^RA(79.1,"BIMG",+Y)) EN1^RAUTL14 Q
LAST EDITED: MAR 28, 1995
HELP-PROMPT: Enter an imaging type for this location.
DESCRIPTION: This 'locations' parameter can contain the name of the type of imaging from the 'Imaging Type'
file. If this field is filled in, the system automatically fills in the proper imaging type on the
registration record.
Assigning an new imaging type (i.e. one not previously selected for any other location) implies
that procedures of the new imaging type are performed under a separate service or section at your
site, and separate workload report is desired. For instance, at some sites Ultrasound may be done
separately from Radiology, and it would be appropriate to assign the 'Ultrasound' imaging type to
one or more locations. Once the 'Ultrasound' imaging type is "activated" in this way, and
procedures designated as 'Ultrasound' imaging type have been registered, the system will report
Ultrasound workload separately from Radiology workload.
NOTE: The 'Cardiology Studies' imaging type should NOT be assigned to a location unless nuclear
cardiology studies are done under a service other than Nuclear Medicine.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
CROSS-REFERENCE: 79.1^BIMG
1)= S ^RA(79.1,"BIMG",$E(X,1,30),DA)=""
2)= K ^RA(79.1,"BIMG",$E(X,1,30),DA)
3)= DO NOT DELETE
Used to determine if a given Imaging Type is assigned to one or more locations.
79.1,7 DEFAULT FLASH CARD FORMAT 0;7 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
DEFAULT FLASH CARD FORMAT TO PRINT
LAST EDITED: OCT 01, 1984
HELP-PROMPT: Enter the default flash card format for this location.
DESCRIPTION: This 'locations' parameter can contain the default format (from the 'Flash Cards Formats' file) to
be used when queueing a flash card to print. This format is the default 'flash card' for the
current location.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,8 HOW MANY EXAM LABELS PER EXAM 0;8 NUMBER
HOW MANY EXAM LABELS TO PRINT PER CASE?
INPUT TRANSFORM: K:+X'=X!(X>9)!(X<0)!(X?.E1"."1N.N) X
LAST EDITED: JUL 23, 1997
HELP-PROMPT: Enter a number, between 0 and 10, for the number of exam labels to print per registered case.
DESCRIPTION: This imaging location parameter is used to set up the number of exam labels to print per registered
case. It must contain a whole number between 0 and 9.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,9 DEFAULT EXAM LABEL FORMAT 0;9 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
DEFAULT EXAM LABEL FORMAT TO PRINT
LAST EDITED: NOV 20, 1984
HELP-PROMPT: Enter an exam label format to be used as the default format for this location.
DESCRIPTION: This imaging 'locations' parameter can contain the default format (from the 'Flash Cards Formats
File') to be used when queueing an exam label to print. This format is the default 'exam label'
for the current location.
Exam labels always print after flash card labels are printed.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,10 REPORT PRINTER NAME 0;10 POINTER TO DEVICE FILE (#3.5)
NAME OF THE DEVICE TO PRINT REPORTS ON
LAST EDITED: FEB 07, 1996
HELP-PROMPT: Select a device where the reports are to be printed.
DESCRIPTION: This 'locations' parameter can contain the device name (1-20 characters) that reports are to be
printed on. If this field is filled in, the system automatically queues the process and the user
is not asked the device question.
SOURCE OF DATA: SITE MANAGER
79.1,11 DEFAULT JACKET LABEL FORMAT 0;11 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
DEFAULT JACKET LABEL FORMAT TO PRINT
LAST EDITED: NOV 30, 1984
HELP-PROMPT: Enter a format for jacket labels to be used as the default format for this location.
DESCRIPTION: This 'locations' parameter can contain the default format (from the 'Flash Cards Formats' file) to
be used when queueing a jacket label to print. This format is the default 'jacket label' for the
current location.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,12 DEFAULT REPORT HEADER FORMAT 0;12 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
DEFAULT REPORT HEADER FORMAT TO PRINT
LAST EDITED: MAR 05, 1985
HELP-PROMPT: Enter a default report header for this location.
DESCRIPTION: This 'locations' parameter can contain the default format (from the 'Flash Cards Formats' file) to
be used when queing a report to print. This format is the default 'header' for the current
location.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,13 DEFAULT REPORT FOOTER FORMAT 0;13 POINTER TO LBL/HDR/FTR FORMATS FILE (#78.2)
DEFAULT REPORT FOOTER FORMAT TO PRINT
HELP-PROMPT: Enter a default report footer for this location.
DESCRIPTION: This 'locations' parameter can contain the default format (from the 'Flash Cards Formats' file) to
be used when queing a report to print. This format is the default 'footer' for the current
location.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,14 REPORT LEFT MARGIN 0;14 NUMBER
LEFT MARGIN FOR REPORT TEXT
INPUT TRANSFORM: K:+X'=X!(X>20)!(X<1)!(X?.E1"."1N.N) X
LAST EDITED: APR 18, 1986
HELP-PROMPT: Enter a number, between 0 and 20, to indicate which column the text fields should begin printing.
DESCRIPTION: This field indicates which column the text for 'clinical history', 'report' and 'impression' should
start at when printing the report. Enter a number between 1 and 20.
79.1,15 REPORT RIGHT MARGIN 0;15 NUMBER
RIGHT MARGIN FOR REPORT TEXT
INPUT TRANSFORM: K:+X'=X!(X>130)!(X<50)!(X?.E1"."1N.N) X
LAST EDITED: APR 18, 1986
HELP-PROMPT: Enter a number, between 50 and 130, to indicate which column the text fields should end printing.
DESCRIPTION: This field indicates which column the text for 'clinical history', 'report' and 'impression' should
end at when printing the report. Enter a number between 50 and 130.
79.1,16 REQUEST PRINTER NAME 0;16 POINTER TO DEVICE FILE (#3.5)
NAME OF THE DEVICE TO PRINT REQUESTS ON
LAST EDITED: FEB 07, 1996
HELP-PROMPT: Select a device where the requests are to be printed.
DESCRIPTION: This 'locations' parameter can contain the device name (1-20 characters) that requests are to be
printed on. If this field is filled in, the system automatically queues the process to the
specified device. If this field is not filled in the request is not automatically queued to print
to any device.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,17 ALLOW 'RELEASED/NOT VERIFIED' 0;17 SET
'Y' FOR yes;
'N' FOR no;
LAST EDITED: FEB 03, 1997
HELP-PROMPT: Enter 'Y'es if 'Released/Not Verified' reports should be allowed.
DESCRIPTION: This Imaging Location parameter can be set to 'Yes' to allow reports to have the status
'RELEASED/NOT VERIFIED' which permits the displaying of the report to users outside of the Imaging
service even if it is not yet verified.
SOURCE OF DATA: RAD/NUC MED COORDINATOR
79.1,18 PRINT DX CODES IN REPORT? 0;18 SET
PRINT DIAGNOSTIC CODES IN THE BODY OF THE REPORT?
'Y' FOR yes;
'N' FOR no;
LAST EDITED: MAY 24, 1994
HELP-PROMPT: Enter 'Y'es if you want the diagnostic codes to print on the report.
DESCRIPTION: If this field is set to Yes, all primary and secondary diagnostic codes associated with the exam
will be printed on the exam report. (Note: Since the primary diagnostic code may be printed in
exam report headers and footers, you may also need to change report header and footer set-ups to
get the diagnostic codes printed exactly as you wish.)
79.1,19 INACTIVE 0;19 DATE
INPUT TRANSFORM: S %DT="ESTX",%DT(0)="-NOW" D ^%DT K %DT(0) S X=Y K:Y<1 X
LAST EDITED: APR 04, 1995
HELP-PROMPT: Enter the date the Imaging Location was inactivated. The date entered cannot be a date in the
future.
DESCRIPTION: Contains the date the Imaging Location was inactivated. Orders cannot be submitted to an inactive
location and cases cannot be registered in an inactive location.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
79.1,20 URGENT REQUEST ALERTS? 0;20 SET
'Y' FOR yes;
LAST EDITED: FEB 14, 1996
HELP-PROMPT: Answer 'Yes' if you want alerts to be sent to Imaging Personnel recipients for URGENT requests.
DESCRIPTION: This field will determine if alerts will be sent to the Imaging Personnel defined in the STAT
REQUEST ALERT RECIPIENTS field. If this field is set to 'Yes', then all the users in the STAT
REQUEST ALERT RECIPIENTS field will be sent an alert for urgent requests. To use this feature, the
Division parameter 'Ask Imaging Location' must be set to 'YES', and OE/RR Version 3.0 or higher
must be installed.
79.1,21 CREDIT METHOD 0;21 SET
'0' FOR Regular Credit;
'1' FOR Interpretation Only;
'2' FOR No Credit;
'3' FOR Technical Component Only;
LAST EDITED: JAN 12, 2021
HELP-PROMPT: Enter the type of credit this location will receive for this examination.
DESCRIPTION: This field indicates the type of credit this location receives for examinations. The default is
REGULAR (code 0), which means that for this imaging location both the exam and the interpretation
are done at your facility. If this imaging location has been set up to register exams done in
another facility, with the imaging interpretation only done at this facility, enter code 1. If
exams are done in this location, but interpretation is done elsewhere, enter code 3. If both the
exam and the interpretation are done elsewhere, and exams entered for this imaging location are
entered only for record-keeping purposes, enter code 2.
FIELD INDEX: ACM (#1033) REGULAR IR SORTING ONLY
Short Descr: This cross reference will sort imaging locations by credit method
Description: This cross reference is used to sort imaging locations by credit method for reporting purposes.
Set Logic: S ^RA(79.1,"ACM",$E(X,1,1),DA)=""
Kill Logic: K ^RA(79.1,"ACM",$E(X,1,1),DA)
Whole Kill: K ^RA(79.1,"ACM")
X(1): CREDIT METHOD (79.1,21) (Subscr 1) (Len 1) (forwards)
79.1,22 DSS ID 0;22 POINTER TO CLINIC STOP FILE (#40.7)
INPUT TRANSFORM: S DIC("S")="I $D(^RAMIS(71.5,""B"",+Y))" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: MAY 20, 1996
HELP-PROMPT: Enter a valid stop code for this imaging location.
DESCRIPTION: DSS ID will be used to identify the general outpatient area where an imaging exam was done. It is
used only by DSS, and only when processing outpatients. It is roughly equivalent to the "Stop
Codes" previously used for crediting outpatient exams. Only entries also in the Imaging Stop Codes
file #71.5 (which must be updated yearly by the Radiology/Nuclear Medicine ADPAC) are valid.
SCREEN: S DIC("S")="I $D(^RAMIS(71.5,""B"",+Y))"
EXPLANATION: Only Stop Codes entered in the Imaging Stop Codes file may be selected.
79.1,23 DOSAGE TICKET PRINTER 0;23 POINTER TO DEVICE FILE (#3.5)
PHARMACEUTICAL DOSAGE TICKET PRINTING DEVICE
LAST EDITED: JUN 19, 1996
HELP-PROMPT: Enter the device to print the radiopharmaceutical dosage ticket
DESCRIPTION: This question only applies to imaging locations with an imaging type where radiopharmaceuticals are
used (i.e. nuclear medicine and cardiology studies). If the facility's exam status parameters are
configured to print Radiopharmaceutical dosage tickets when exams reach a specified status, and
name of the printer device is entered here, then dosage tickets for nuclear medicine procedures
registered in this location will print on this device.
79.1,24 CANCELLED REQUEST PRINTER 0;24 POINTER TO DEVICE FILE (#3.5)
LAST EDITED: SEP 05, 1996
HELP-PROMPT: Enter the device receiving the cancelled request.
DESCRIPTION:
This field specifies the device where the cancelled request will be output.
79.1,25 RAD/NUC MED DIVISION DIV;1 POINTER TO RAD/NUC MED DIVISION FILE (#79)
RAD/NUC MED HOSPITAL DIVISION
LAST EDITED: MAY 25, 1994
HELP-PROMPT: Enter the name of the division associated with this location.
DESCRIPTION: This field contains the name of the Radiology/Nuclear Medicine 'division' that this 'location' is
associated with. A 'location' can only be associated with one 'division'.
WRITE AUTHORITY: ^
SOURCE OF DATA: RAD/NUC MED COORDINATOR
UNEDITABLE
NOTES: TRIGGERED by the IMAGING LOCATION field of the IMAGING LOCATIONS sub-field of the RAD/NUC MED
DIVISION File
79.1,26 VOICE DICTATION AUTO-PRINT 0;26 SET
'Y' FOR yes;
LAST EDITED: JUN 26, 1997
HELP-PROMPT: Enter Y if you want to have a report automatically printed when voice dictation is used to enter
a report.
DESCRIPTION: If this field is Y , and voice dictation is used to enter a report, a copy of the report will be
automatically printed on the device defined in field REPORT PRINTER NAME.
79.1,28 REGISTERED REQUEST PRINTER 0;25 POINTER TO DEVICE FILE (#3.5)
LAST EDITED: JUN 16, 2017
HELP-PROMPT: Enter the device receiving the registered request.
DESCRIPTION:
This field specifies the device where the registered request will be output.
79.1,81 ALTERNATE REQUEST PRINTER ARP;1 POINTER TO DEVICE FILE (#3.5)
LAST EDITED: DEC 09, 2021
HELP-PROMPT: Select a device where the requests will be printed after hours.
DESCRIPTION: This 'locations' parameter can contain the device name (1-20 characters) that requests are to be
printed on based on the ALTERNATE PRINTER USAGE parameter, either after hours or as an alternate
printer. If this field is filled in and the other parameter criteria are met, the system
automatically queues the request to the specified device. If this field is not filled in, the
request is will queue to print to the REQUEST PRINTER, if defined.
79.1,82 ALTERNATE PRINTER USAGE ARP;2 SET
'1' FOR AFTER HOURS PRINTER;
'2' FOR ALTERNATE PRINTER;
LAST EDITED: DEC 15, 2021
HELP-PROMPT: Select the usage for the Alternate Request Printer.
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to define it's
usage. The choices are:
1 AFTER HOURS PRINTER
2 ALTERNATE PRINTER
If After Hours Printer is selected, the printing logic will evaluate the After Hours parameters
BEGIN/END times, along with WEEKEND, HOLIDAY and CATEGORY OF EXAM to determine if the request
should be routed to the ALTERNATE REQUEST PRINTER.
If Alternate Printer is selected, the alternate printer parameters REQUESTING LOCATION and CATEGORY
OF EXAM will be evaluated to determine if the request should be routed to the ALTERNATE REQUEST
PRINTER.
79.1,83 AFTER HOURS BEGIN TIME ARP;3 FREE TEXT (TIME Data Type)
PROPERTY: SECONDS ALLOWED (Value = 0)
LAST EDITED: DEC 13, 2021
HELP-PROMPT: Enter the time of day (between 12PM and 12AM) to start after hours printing.(I.E. 7:00PM)
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to set the time
of day that requests will automatically start printing on the ALTERNATE REQUEST PRINTER.
79.1,84 AFTER HOURS END TIME ARP;4 FREE TEXT (TIME Data Type)
PROPERTY: SECONDS ALLOWED (Value = 0)
LAST EDITED: DEC 13, 2021
HELP-PROMPT: Enter the time of day (between 12AM and 12PM) to end after hours printing.(I.E. 7:00AM)
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to set the time
of day that requests will automatically be routed back to the REQUEST PRINTER.
79.1,85 AFTER HOURS WEEKEND ARP;5 SET
'Y' FOR YES;
'N' FOR NO;
LAST EDITED: DEC 09, 2021
HELP-PROMPT: Enter YES to designate weekends for after hours printing.
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to determine if
weekends (Saturday/Sunday) are considered after hours. If set to YES, radiology requests will be
routed to the ALTERNATE REQUEST PRINTER all day on the weekend.
79.1,86 AFTER HOURS HOLIDAY ARP;6 SET
'Y' FOR YES;
'N' FOR NO;
LAST EDITED: DEC 09, 2021
HELP-PROMPT: Enter 'Yes' if after hours printing should include
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to determine if
holidays are considered after hours. If set to YES, radiology requests will be routed to the
ALTERNATE REQUEST PRINTER all day on holidays.
Note that this parameter relies on the HOLIDAY file (#40.5) being populated with the each year's
holidays. If it is not populated, holidays will not be included in after hours printing.
79.1,87 ARP CATEGORY OF EXAM ARP;7 SET
'I' FOR INPATIENT;
'O' FOR OUTPATIENT;
'A' FOR ALL;
LAST EDITED: DEC 09, 2021
HELP-PROMPT: Enter the category of exams for requests printing to the ALTERNATE REQUEST PRINTER
DESCRIPTION: This location parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to determine if
the category of exam (patient classification) of the request will be routed to the ALTERNATE
REQUEST PRINTER.
79.1,88 ALTERNATE PRT REQUESTING LOC ARPL;0 POINTER Multiple #79.188 (Add New Entry without Asking)
79.188,.01 ALTERNATE PRT REQUESTING LOC 0;1 POINTER TO HOSPITAL LOCATION FILE (#44)
LAST EDITED: DEC 09, 2021
HELP-PROMPT: Enter the requesting location to go to the ALTERNATE REQUEST PRINTER.
DESCRIPTION: This 'locations' parameter is used in conjunction with the ALTERNATE REQUEST PRINTER to identify
requesting locations that will cause the request to be routed to the ALTERNATE REQUEST PRINTER.
CROSS-REFERENCE: 79.188^B
1)= S ^RA(79.1,DA(1),"ARPL","B",$E(X,1,30),DA)=""
2)= K ^RA(79.1,DA(1),"ARPL","B",$E(X,1,30),DA)
79.1,100 CAMERAS/EQUIP/RMS R;0 POINTER Multiple #79.12
CAMERA/EQUIP/RMS SUB-FIELD
LAST EDITED: JUN 03, 1994
DESCRIPTION:
This is a multiple field containing the cameras/equip/rms associated with this 'location'.
79.12,.01 CAMERA/EQUIP/RM 0;1 POINTER TO CAMERA/EQUIP/RM FILE (#78.6) (Multiply asked)
CAMERAS/EQUIP/RMS ASSOCIATED WITH THIS 'LOCATION'
INPUT TRANSFORM: S DINUM=X Q
LAST EDITED: JUN 03, 1994
HELP-PROMPT: Enter all the cameras/equip/rms for this location.
DESCRIPTION: This field contains a list of cameras/equip/rms (from the 'Camera/Equip/Rm' file) that can be
chosen when entering data for exams done in this 'location'. Cameras/equip/rms can be used by
more than one 'location'.
SOURCE OF DATA: COORDINATOR
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
79.1,120 COMMUNITY CARE REQUEST SERVICE CON;0 POINTER Multiple #79.11 (Add New Entry without Asking)
DESCRIPTION:
Consult request service for Community Care Consults referral program.
79.11,.01 COMMUNITY CARE REQUEST SERVICE 0;1 POINTER TO REQUEST SERVICES FILE (#123.5)
INPUT TRANSFORM: S DIC("S")="N RARY D CCCHK^RAORDR2(DA) I $D(RARY(+Y))" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: JAN 17, 2025
HELP-PROMPT: Enter the Community Care Consult for this location.
DESCRIPTION:
Consult request service for Community Care Consults referral program.
SCREEN: S DIC("S")="I $$CCCHK^RAORDR2(DA,+Y)"
EXPLANATION: Only Community Care Consults for the location's imaging type are allowed.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
CROSS-REFERENCE: 79.11^B
1)= S ^RA(79.1,DA(1),"CON","B",$E(X,1,30),DA)=""
2)= K ^RA(79.1,DA(1),"CON","B",$E(X,1,30),DA)
79.1,135 DEFAULT CPT MODIFIERS(LOC) DCM;0 POINTER Multiple #79.1135
79.1135,.01 DEFAULT CPT MODIFIERS(LOC) 0;1 POINTER TO CPT MODIFIER FILE (#81.3) (Multiply asked)
INPUT TRANSFORM: S DIC("S")="I $$SDL^RACPTMSC(+Y)" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: APR 28, 2000
TECHNICAL DESCR: One or more default CPT Modifiers may be entered for this location; however, the entry cannot be
screened against a CPT CODE, because there is no CPT CODE to compare with. The only screening
done would be to eliminate VA local modifiers.
Whatever are entered here will be stuffed into the exam record that is registered under this
location, IF AND ONLY IF that procedure being registered does not already have default CPT
Modifiers.
SCREEN: S DIC("S")="I $$SDL^RACPTMSC(+Y)"
EXPLANATION: VA local modifiers are automatically screened out (rejected.)
EXECUTABLE HELP: D EHDL^RACPTMSC
CROSS-REFERENCE: 79.1135^B
1)= S ^RA(79.1,DA(1),"DCM","B",$E(X,1,30),DA)=""
2)= K ^RA(79.1,DA(1),"DCM","B",$E(X,1,30),DA)
79.1,150 STAT REQUEST ALERT RECIPIENTS REC;0 POINTER Multiple #79.13 (Add New Entry without Asking)
LAST EDITED: FEB 14, 1996
DESCRIPTION: Names entered here will be used as recipients of an alert when new STAT requests for Imaging exams
are submitted to this Imaging Location. To use this feature, the division parameter 'ASK IMAGING
LOCATION' must be set to 'Yes', and OE/RR Version 3.0 or higher must be installed. If the URGENT
alert is turned on, the recipients entered here will also receive alerts when an URGENT request is
entered.
79.13,.01 STAT REQUEST ALERT RECIPIENTS 0;1 POINTER TO NEW PERSON FILE (#200) (Multiply asked)
INPUT TRANSFORM: S DIC("S")="I $O(^VA(200,+Y,""RAC"",0))" D ^DIC K DIC S DIC=DIE,X=+Y K:Y<0 X
LAST EDITED: FEB 14, 1996
HELP-PROMPT: Enter Rad/Nuc Med personnel who should be notified if a request priority is 'STAT'.
DESCRIPTION: Recipients must have a Radiology/Nuclear Medicine personnel classification. They will receive an
alert whenever a STAT request is submitted to this Imaging Location. To use this feature, the
division parameter, 'ASK IMAGING LOCATION' must be set to 'Yes', and OE/RR Version 3.0 or higher
must be installed.
SCREEN: S DIC("S")="I $O(^VA(200,+Y,""RAC"",0))"
EXPLANATION: Recipients must have Rad/Nuc Med personnel classification.
CROSS-REFERENCE: 79.13^B
1)= S ^RA(79.1,DA(1),"REC","B",$E(X,1,30),DA)=""
2)= K ^RA(79.1,DA(1),"REC","B",$E(X,1,30),DA)
FILES POINTED TO FIELDS
CAMERA/EQUIP/RM (#78.6) CAMERAS/EQUIP/RMS:CAMERA/EQUIP/RM (#.01)
CLINIC STOP (#40.7) DSS ID (#22)
CPT MODIFIER (#81.3) DEFAULT CPT MODIFIERS(LOC):DEFAULT CPT MODIFIERS(LOC) (#.01)
DEVICE (#3.5) FLASH CARD PRINTER NAME (#3)
JACKET LABEL PRINTER NAME (#5)
REPORT PRINTER NAME (#10)
REQUEST PRINTER NAME (#16)
DOSAGE TICKET PRINTER (#23)
CANCELLED REQUEST PRINTER (#24)
REGISTERED REQUEST PRINTER (#28)
ALTERNATE REQUEST PRINTER (#81)
HOSPITAL LOCATION (#44) LOCATION (#.01)
ALTERNATE PRT REQUESTING LOC:ALTERNATE PRT REQUESTING LOC (#.01)
IMAGING TYPE (#79.2) TYPE OF IMAGING (#6)
LBL/HDR/FTR FORMATS (#78.2) DEFAULT FLASH CARD FORMAT (#7)
DEFAULT EXAM LABEL FORMAT (#9)
DEFAULT JACKET LABEL FORMAT (#11)
DEFAULT REPORT HEADER FORMAT (#12)
DEFAULT REPORT FOOTER FORMAT (#13)
NEW PERSON (#200) STAT REQUEST ALERT RECIPIENTS:STAT REQUEST ALERT RECIPIENTS (#.01)
RAD/NUC MED DIVISION (#79) RAD/NUC MED DIVISION (#25)
REQUEST SERVICES (#123.5) COMMUNITY CARE REQUEST SERVICE:COMMUNITY CARE REQUEST SERVICE (#.01)
INPUT TEMPLATE(S):
RA LOCATION PARAMETERS JAN 21, 2021@08:24 USER #0
This input template is used for the entering of the imaging location
parameters.
RA SITE MANAGER DEC 30, 2021@07:22 USER #0
This template is used by the IRM service for defining input and
printing devices for the radiology/nuclear medicine package.
PRINT TEMPLATE(S):
RA EXAM ROOM LIST AUG 14, 1996@10:21 USER #0 Imaging Camera/Equipment/Room List
RA IMAGE LOC LIST DEC 15, 2021@09:11 USER #0 Imaging Location List
Generates a list of locations from the Imaging Location file.
SORT TEMPLATE(S):
RA EXAM ROOM LIST JUN 24, 1996@10:56 USER #0 'RA EXAM ROOM LIST' Print Template always used
SORT BY: @CAMERAS/EQUIP/RMS//
CAMERAS/EQUIP/RMS SUB-FIELD: CAMERA/EQUIP/RM// (CAMERA/EQUIP/RM not null)
WITHIN CAMERA/EQUIP/RM, SORT BY: RAD/NUC MED DIVISION// (RAD/NUC MED DIVISION not null)
WITHIN RAD/NUC MED DIVISION, SORT BY: LOCATION// (LOCATION not null)
RA IMAGE LOC LIST FEB 21, 1996@08:54 USER #0 'RA IMAGE LOC LIST' Print Template always used
SORT BY: TYPE OF IMAGING// (TYPE OF IMAGING not null)
WITHIN TYPE OF IMAGING, SORT BY: RAD/NUC MED DIVISION// (All RAD/NUC MED DIVISION (includes nulls))
WITHIN RAD/NUC MED DIVISION, SORT BY: #LOCATION// (LOCATION not null)
This template is used to sort location parameters by imaging
location.
FORM(S)/BLOCK(S):