DSSO CREATE STOCK ISSUE

TITLEVALUE
NAMEDSSO CREATE STOCK ISSUE
DESCRIPTIONThis RPC creates a Stock Issue in GIP depending on the setting of the
Automated Inventory (GIP) field (#2) in the Prosthetics Site Parameters
file (#669.9).

This RPC is only used for GIP stock issues.
TAGEN
ROUTINEDSSOSTJ
INPUT PARAMETERSSEQUENCE NUMBER1
INPUT PARAMETERDSSOSTE
DESCRIPTIONProsthetics Site Parameters file (#669.9) IEN
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER2
INPUT PARAMETERDSSODFN
DESCRIPTIONProsthetic Patient file (#665) IEN
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER3
INPUT PARAMETERDSSODUZ
DESCRIPTIONLogged-in User
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER4
INPUT PARAMETERDSSOSRC
DESCRIPTIONSource: "V" - VA; "C" - Commercial
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH1
INPUT PARAMETERSSEQUENCE NUMBER5
INPUT PARAMETERDSSOTYP
DESCRIPTIONType of Transaction - "I" - Initial Issue
"X" - Repair
"R" - Replace
"S" - Spare
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH1
INPUT PARAMETERSSEQUENCE NUMBER6
INPUT PARAMETERDSSOCAT
DESCRIPTIONPatient Category - 1 - "SC/OP"
2 - "SC/IP"
3 - "NSC/IP"
4 - "NSC/OP"
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH1
INPUT PARAMETERSSEQUENCE NUMBER7
INPUT PARAMETERDSSOSPE
DESCRIPTIONSpecial Category - required if Patient Category=4 "NSC/OP":
1 - "SPECIAL LEGISLATION"
2 - "A&A"
3 - "PHC"
4 - "ELIGIBILITY REFORM"
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH1
INPUT PARAMETERSSEQUENCE NUMBER8
INPUT PARAMETERDSSOITM
DESCRIPTIONPSAS Item - Prosthetic Item Master file (#661) IEN
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER9
INPUT PARAMETERDSSOHCP
DESCRIPTIONHCPCS Code - Prosthetic HCPCS file (#661.1) IEN
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER10
INPUT PARAMETERDSSOCPT
DESCRIPTIONCPT Modifier - 1-36 characters; CPT modifiers in a comma-delimited format.
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH36
INPUT PARAMETERSSEQUENCE NUMBER11
INPUT PARAMETERDSSOLOC
DESCRIPTIONInventory Location (PIP) - required if PIP Stock Issue - Pros Item
Location file (#661.3) IEN
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER12
INPUT PARAMETERDSSOINV
DESCRIPTIONInventory Point (GIP) - required if GIP Stock Issue - Generic Inventory
file (#445) IEN
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER13
INPUT PARAMETERDSSOVEN
DESCRIPTIONVendor - Vendor file (#440) IEN - defaults to Mandatory or Requested
Source (#.4) in the Inventory Item sub-file (#445.01) in the Generic
Inventory file (#445)
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH15
INPUT PARAMETERSSEQUENCE NUMBER14
INPUT PARAMETERDSSOQTY
DESCRIPTIONQuantity - 0-9999, no decimals
PARAMETER TYPELITERAL
REQUIREDYES
MAXIMUM DATA LENGTH4
INPUT PARAMETERSSEQUENCE NUMBER15
INPUT PARAMETERDSSOUCS
DESCRIPTIONUnit Cost:
0-999999, two decimals
0.00 is valid
If this is a GIP stock issue and Source is Commercial, defaults to Last
Cost (Unit of Issue) (#4.7) from the Generic Inventory file (#445).
If this is a non-GIP stock issue, then for the selected vendor in file
the Item Master (file 441) sub-file 441.01 Vendor, Unit Cost (#1) /
Unit Conversion Factor (#10) if it exists; otherwise, divided by 1
and formatted as 9 digits including 2 decimals - use DSSO DTLD GET
ITEM MASTER with DSSOFLD=V and search for the selected vendor.
If this is a PIP stock issue and an entry exists, then get the
default Unit Cost from the Average Cost field (#30) of the HCPCS
multiple (#661.31) / Item multiple (#661.312) from the Pros Item
Location file (#661.3).
If no Unit Cost exists, then prompt for Unit Cost.
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH9
INPUT PARAMETERSSEQUENCE NUMBER16
INPUT PARAMETERDSSOSER
DESCRIPTIONSerial Number - defaults to file 660 field 9 Serial Nbr; can be deleted;
1-20 characters; cannot contain "^"
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH20
INPUT PARAMETERSSEQUENCE NUMBER17
INPUT PARAMETERDSSOLOT
DESCRIPTIONLOT Number - defaults to file 660 field 21 LOT Number; can be deleted;
1-20 characters; cannot contain "^"
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH20
INPUT PARAMETERSSEQUENCE NUMBER18
INPUT PARAMETERDSSORMK
DESCRIPTIONRemarks - defaults to file 660 field 16 Remarks; can be deleted;
1-20 characters
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH61
INPUT PARAMETERSSEQUENCE NUMBER19
INPUT PARAMETERDSSOGRP
DESCRIPTIONAMIS Grouper - value that groups associated stock issues together in file
660; this value is null for the first item, but for subsequent
associated stock issues, use the value returned in the second ^-piece
of the successful completion message from this RPC.
PARAMETER TYPELITERAL
REQUIREDNO
MAXIMUM DATA LENGTH15
RETURN VALUE TYPESINGLE VALUE
RETURN PARAMETER DESCRIPTIONOutput:
Error Messages:
DSSORET="-1^"_error message or "0^"_error message
Successful Completion:
DSSORET= "1" ^ AMIS Grouper ^ "STOCK ISSUE CREATED SUCCESSFULLY"
where AMIS Grouper = a number that groups related Stock Issues
together
AVAILABILITY
INACTIVE
CLIENT MANAGER
WORD WRAP ON
VERSION
SUPPRESS RDV USER SETUP
APP PROXY ALLOWED